EnGenius ECW520 Cloud7 2x2x2 Check and Evaluate – MBReviews

The EnGenius ECW520 is among the most inexpensive WiFi 7 entry factors that the corporate at the moment provides and its purpose was to supply enterprise-level options, whereas retaining the value tag beneath $200. And that’s completely high quality, however we do have the 2x2x2 ECW526 out there as nicely and not too long ago, EnGenius has additionally launched the inexpensive Cloud Lite ECW516L, so the place does the ECW520 place available in the market?

The Cloud Lite entry factors are clearly extra restricted each in {hardware} skills and by way of software program assist, however the ECW520 and the ECW526 are extremely comparable. Each depend on the Qualcomm platform, the antenna achieve is comparable, with the previous really being a bit higher on the two.4GHz radio, however there’s a main distinction by way of port. The ECW526 comes with a 10GbE PoE+ port, whereas the newer ECW520 is supplied with a 2.5GbE PoE+ port.

The three radios (together with the 6GHz) are provided on each entry factors and so are a lot of the newer WiFi7 options, so there’s fairly a little bit of overlapping between these two units. Then once more, there could also be extra elementary variations which can be lower than skin-deep, so let’s take a more in-depth have a look at the ECW520 and see the way it carry out in relation to its fundamental rivals.

The Design and Construct High quality

By way of design, the EnGenius ECW520 is nearer to the ECW130, than the newer, slimmer fashions. Positive, it’s a bit thick, but it surely’s additionally far smaller, standing at 15.8 x 15.8 x 3.5cm.

The entry level does include a bracket, so it’s simple to mount it on the ceiling, however there are additionally a few holes throughout the metallic alloy backside, so it’s doable to wall-mount the machine as nicely. Additionally, equally to the opposite EnGenius entry factors, the highest is plastic, so the metallic backside takes the position of dissipating the warmth away from the parts. Up to now, it has confirmed to be a dependable system. As for LEDs, there’s a single one which is much from being intuitive. It’s a mix between inexperienced and blue to let you recognize the standing of the AP..

Anyway, on the rear aspect, we get to see the ports space the place’s we will discover the recessed Reset button, a 12V DC port and a single 2.5GbE PoE+ port.

The Thermal Administration

Now let’s discuss concerning the warmth administration of the entry level. I did open up the machine and, whereas compact, EnGenius appeared to have made the ECW520 pretty environment friendly. However this must be confirmed by a thermal digital camera.

And, after working a number of checks to simulate a resource-heavy setting, the entry level does get fairly scorching going above 52C (125F), so we may even see some type of throttling if there’s a variety of fixed strain placed on the community.

EnGenius ECW520 Teardown

As traditional, it’s quite simple to open an EnGenius entry level, so in case you have to take away mud or restore the machine, the producer made the method easy. All I needed to do was take away the 4 screws from the underside of the machine and the highest half will pop off simply. Then, we will see the antenna array and, after taking out the screws, we will detach this half as nicely, however not earlier than the six antennas are eliminated as nicely.

And it’s not as simple as I anticipated it to be. That’s as a result of the antenna connectors are glued to the board for some purpose. It’s not simple to detach them, so I don’t actually see the purpose, however the engineers thought in any other case. In any case, we will see the storage chipset on the underside of the PCB, whereas the remainder of the principle parts may be discovered on the highest aspect, beneath the aluminum covers. As a aspect word, the EnGenius ECW520 has comparable {hardware} to the Xiaomi BE6500 Professional.

{Hardware} Comparability

Single Shopper Checks (6GHz & 5GHz)

I couldn’t assist however examine the throughput I managed to report testing the EnGenius ECW520 with the Cloud Lite ECW516L. And that’s as a result of each these entry factors include comparable worth tags.

From the seems to be of it, the ECW520 provides a greater throughput close to the consumer, however after going a bit farther away, even at 5 meters away, the efficiency is sort of comparable.

And that’s true each upstream and downstream. Discover how these two entry factors failed to keep up a connection father than 20 meters (or about 70 ft).

Issues do change barely after checking the sign attenuation graph.

The WiFi 7 consumer is the winner when close to the entry level and the loser on the higher-range checks. The opposite purchasers did pretty nicely and it was fascinating to see how decreasing the channel bandwidth on the 6GHz radio displayed a greater throughput only a bit farther from the consumer.

Once more, this stays true each upstream and downstream. When in comparison with different wi-fi entry factors, the ECW520 sits between the ECW230S and the FIT 4×4 Lite, so long as the 5GHz radio is used set at 80MHz.

After switching to the 160MHz width, the ECW520 sits between the ECW536 from the identical household of entry factors and the U6 Professional.

When utilizing the 6GHz radio and the 320MHz channel width, the entry factors sits between the U7 Professional Max and the U7 Professional.

Lastly, I made a decision to incorporate a longer-term efficiency graphic the place we will see some curious fluctuations, particularly when utilizing the 5GHz hi fi to the 160MHz.

May they be heat-related? Unsure, however the entry level undoubtedly runs hotter than different units from EnGenius.

Single Shopper Checks (2.4GHz)

Now let’s swap to the two.4GHz radio efficiency. We will see that it’s an honest throughput utilizing both a WiFi 6 or a WiFi 5 consumer machine and we do get usable throughput even when the gap is above 20m from the entry level.

The sign attenuation graph merely enforces the earlier outcomes as we see near 40Mbps even when the attenuation is -88dB.

When in comparison with different entry factors, the EnGenius ECW520 sits between the TP-Hyperlink EAP773 and the EAP670 which is a good efficiency, particularly because it’s higher than what I noticed with the ECW512L.

The Multi-Shopper Checks

I don’t take a look at networking {hardware} that usually anymore, however I nonetheless most popular to go pretty in depth when testing the EnGenius ECW520, so I as soon as once more relied on net-hydra, a set of instruments developed by Mr Jim Salter and which can be found for anybody on GitHub. The preliminary take a look at entails simulating 1080p streaming on 5 consumer units.

And sure, solely a few them are an identical, the WiFi 6 laptops, however I suppose a various solid could present a extra sensible efficiency that may be anticipated in most households.

The outcomes present that one WiFi 6 consumer and the WiFi 5 ZimaBoard 832 carried out the worst, whereas the MacBook Professional did a bit higher, the final two purchasers doing decently nicely. Not excellent, however usable.

Switching to the 4K streaming graphic, we will see an identical efficiency throughout the identical purchasers, with two purchasers doing nicely, whereas the others exhibiting unusable latency.

If I have been to check it to the ECW512L, it’s nonetheless nicely higher contemplating that each one consumer units went above 100ms just about from the start. Now, I made a decision to incorporate intense searching and run it alongside the preliminary 1080p streaming.

It’s clearly higher to restrict the variety of purchasers if that is one thing that usually occurs in your community, but it surely’s nonetheless good to know that we do get sub-100ms latency on three purchasers for about 95% of the time. Not preferrred, however usable to a sure extent.

The extraordinary searching graphic exhibits that one consumer is pushed near the restrict, however the remaining behave properly. Transferring ahead, I ran the extreme searching site visitors alongside 4K streaming and I acquired the next outcomes.

The 4K streaming graphic exhibits that it’s probably not a good suggestion. Positive, we get to see a latency close to 150ms for the 4 purchasers which can be close to the entry level, but it surely’s probably not usable. Nonetheless, as soon as once more, this can be a higher efficiency than what I noticed with the ECW512L.

That being stated, let’s additionally obtain a 10MB file constantly, however restrict the variety of purchasers to 5, every with its personal kind of simulated site visitors.

After all, I began with a few downloading purchasers, one staying close to 300ms more often than not, the opposite going to 600ms virtually instantly and staying there for the complete period of the take a look at. There’s impression on the opposite purchasers as nicely, rendering them unusable so I made a decision to restrict the variety of downloading purchasers to at least one.

And the outcomes are peculiar. Positive, the downloading consumer stood close to of beneath 250ms more often than not, however the two 4K streaming purchasers had a pointy rise for five% of the time. The extraordinary searching consumer had a excessive latency, however inside affordable limits.

As a comparability, it’s not that a lot totally different than the ECW512L’s efficiency.

Subsequent, I restricted the variety of purchasers to 3, however downloading a 10MB file remains to be too taxing, so I made a decision to obtain a 1MB file and swap the 4K streaming to VoIP.

And the end result is definitely respectable. After all, I additionally included the latency when all 5 purchasers have been downloading a 10MB file constantly only for enjoyable.

The MLO Efficiency

Transferring on the MLO efficiency, we get to see some fascinating issues.

We instantly discover that no matter whether or not set to 320MHz or the 160MHz channel bandwidth, the 6GHz radio doesn’t get very far, but it surely does have the most effective near-the-access-point throughput. I did undergo all of the out there MLO configurations and it’s doable for the throughput to go above 2Gbps in sure cases, however that’s simply upstream.

Downstream, the efficiency is a little more subdued, however nonetheless pretty respectable. If you would like throughput each close to and farther from the entry level, I recommend going for the 5GHz and 6GHz combo, each set to the 160MHz channel width. In any other case, 2.4GHz and 5GHz is an honest mixture as nicely. On the finish, I’ve included the info I collected when working FLENT.

The Standalone Mode

The EnGenius ECW520 does have a standalone mode, but it surely’s barely helpful. You get some primary monitoring information and what’s known as Native Setting. It features a few network-related settings and nothing extra, so that you do have to depend on the Cloud for the right expertise. This might be an issue sooner or later if EnGenius decides to not assist this mannequin anymore.

The Cloud Platform

I did point out the ECW512L a number of occasions, however whereas this one get the Lite model of the Cloud, utilizing the ECW520 gives you full entry to the EnGenius Cloud platform. The areas of curiosity are, as anticipated, the Dashboard and Entry Factors for the monitoring instruments of which there are fairly a number of.

However for configuration, there’s the SSIDs and radio sections the place you possibly can set the overall settings which can be utilized for all entry factors that can be added to the community. You do get the choice to overwrite these settings on the machine stage with ease and we additionally get the enduring Diag instruments which do come to life should you get the Professional subscription. Then once more, even in its present default state, it’s nonetheless a lot sufficient for many community admins.

The Conclusion

OK, so do you have to take into account the EnGenius ECW520? SMBs will certainly have a variety of enjoyable with it. The worth is pretty low, whereas getting a lot of the superior WiFi 7 options plus the flexibility of the Cloud platform. It’s simple to watch, configure and the Diag instruments can be of nice assist to sys admins. Is it higher than the ECW516L? Probably not. I believe the ECW520 is the higher possibility.